Mobile Phone Repairing Safety Tips and Tricks

73
1116
Mobile Phone Repairing Safety Tips
Photo Credit: google.com

Mobile Phone Repairing Safety Tips and Tricks, Rules, and Precautionary Measures are important not only when fixing mobile phones but also when handling or fixing any electronic device or gadget. The parts inside a cell phone or smartphone are very sensitive, especially to ESD, or Electrostatic Discharge. By taking safety measures and being careful, you can keep the PCB of your mobile phone from getting damaged.

If you run a business fixing mobile phones and follow these Mobile Phone Repairing Safety Tips and Tricks, people will know that you are organized and have the right tools. Your fast mobile phone repair service also helps people and they can remember that the first impression is the only one that matters. If you are well-prepared and well-informed, your customers will always be happier than those of your competitors.

Modern smartphones are expensive, and no one would want to give one to someone who doesn’t have the right tools or isn’t well-organized to fix it. Here are some safety tips for fixing cell phones that have been tried and tested. If you follow these rules, you will soon see a difference in your business.

Mobile Phone Repairing Safety Tips and Tricks: Guidelines and Instructions

Use ESD-Safe Work Station

Yes, you must always use an ESD-Safe Workbench to fix a cell phone, tablet, laptop, or another electronic device of any brand. An ESD-Safe workbench is just a table made of ESD-Safe materials with an ESD-Safe Mat on the part where repairs are done. The person fixing the table, the ESD Mat, and the whole table are all properly grounded. This stops any damage that could be caused by static electricity to the gadget or cell phone.

Now, static electricity is the flow of electrons from one body to another that is not wanted. These electrons with a negative charge can damage sensitive electronic parts, mostly SMD (Surface Mount Devices). These workstations are well set up so that all the tools you use often are easy to reach and in the right place.

Use Right ESD-Safe Tools

Well-trained and with good tools. Don’t use different tools or tools that aren’t very good. Use only tools that are made for the device you want to fix or fix up. For example, anti-static gloves, anti-static discharge cables, and a cheap phone for this job. Disassemble Tools Opening Pry You can easily find tools made of hard plastic. For this kind of repair, you will always need a screwdriver that can do more than one thing.

ESD Safety and Protection

ESD, which stands for “Electro Static Discharge,” is a sudden flow of electricity between two electrically charged objects when they touch. Wearing an ESD-Safe Apron, ESD-Safe Slippers, ESD-Safe Hand Gloves, and an Anti-static wrist strap will protect you from ESD. You also need to work on a good ESD mat.

Together, these three things will make sure that you don’t transfer any static electricity from your body to the gadget you are fixing. Remember that you don’t need ESD protection for your own safety. It keeps the electronic parts on the logic board or motherboard from getting damaged.

Use ESD-Safe Tray

When you take apart a handset, you should always put all of the parts in a separate tray (or container) so that you don’t have to remember where they are when you put the handset back together. This way, you won’t forget to put anything back together, and you’ll also know how many screws you’ve replaced and won’t forget to put any back in.

Some customers are very picky about these little things, and if you forget one of these screws, they might be upset. Keeping all the parts in one tray will also save you a lot of time that you will waste if you don’t follow this rule.

Handle Delicate Parts Carefully for Safety

Most of a cell phone or smartphone’s parts are very small and fragile. Look after them. Make sure the LCD doesn’t get any scratches, for example. Make sure to be careful with connectors and cables that connect things, as they are very fragile.

Handle Hot Air Blower and Soldering Iron with Care for Safety

Care must be taken when using a hot air machine, soldering iron, or a soldering station. They can hurt both the device and you. The air that comes out of a hot air machine is very hot. Make sure the nozzle is pointed in the right direction. Turn it OFF when you’re not using it. Also, be careful when you use a hot soldering iron.

Never put the iron on the table; always use an iron stand. For these kinds of repairs, you also need a liquid that is very flammable, like IPA. They need to be put in the right spot to keep from getting too hot.

Take care of customer’s data

When you fix a phone, don’t delete the information unless you have to. Because sometimes the information on the phone is more important than the phone itself. If it’s absolutely necessary, you should make a copy of the data and get the customer’s permission before resetting the phone.

Read More:

How to Fix US/DS Blinking Light Arris Modem

How to Fix Hulu error code p-dev320

Https Www Tlc Com Activate

What is Plex not Available Outside Your Network?

LEAVE A REPLY

Please enter your comment!
Please enter your name here